AV501 Needle valve (filler valve)
Product Features
• The adoption of a diaphragm that separates wetted parts from drive parts and a highly sealed needle valve allows use with a wide range of liquids including filler-containing materials
• Compatible materials: Filler-containing materials, epoxy, silicone, and other general liquids
• Compatible materials: Filler-containing materials, epoxy, silicone, and other general liquids
Product Specifications
| Item | Specification |
|---|---|
| Valve Structure | Needle valve type |
| Minimum Dispensing Volume | 0.01mL |
| Flow Rate (KV value) | 4L/min. |
| Applicable Viscosity | 1~500,000mPa•s |
| Wetted Parts Material | SUS304, Polypropylene, Polyamide |
| Material Feed Pressure | Max. 686kPa |
| Piping Connection | IN. PT1/4 |
| Operating Speed | 150cycles/min. |
| Operating Air Pressure | 392~686kPa |
| External Dimensions | (□)30×(H)131.5mm (excluding protrusions) |
| Weight | 440g |
| Standard Accessories | Quantity |
|---|---|
| AV501B-1 Molded Diaphragm (Polyamide) | 1 |
| AV501-12 Dispenser | 1 |
＞AV501B-1 molded diaphragm is installed at time of shipment.
| Consumable Parts | Quantity |
|---|---|
| AV501B-1 Molded Diaphragm (Polyamide) (Pre-installed at shipment) | 4 |
| AV501-13 Diaphragm (PTFE) | 2 |
| AV501-12 Dispenser | 5 |
| AV501-6 Needle Valve | 2 |
| AV501-14 Seal Support | 10 |
Main Applications for This Product
You can check representative applications in each industry.
Epoxy Resin Sealing for Automotive Relays
Grease Application to Car Air Conditioner Sliding Parts
Potting for EV-Specific Automotive PCB Cases
Headlight Sealing
Brazing Material Application to Muffler Components
Grease Application to Dashboard Switch Sliding Parts
Fuel Cell Manufacturing Process Applications
Application to Solar Panel Manufacturing Process
Ink Filling for Stamp Pads
Chocolate Filling into Molds
Syrup Filling into Canned Goods
Color Filling for Domino Tiles
