Temperature Control System
NEO-ONE EX
- Cools or heats material automatically by Peltier method.
- Holds constant temperature and suppresses viscosity changes by temperature increase and friction heat owing to repetition.
- Optimal for solder paste, silver paste and epoxy adhesives.
Specification
| Temperature Set Range | 20 ~ 50℃ (at outside temp. 28℃) |
|---|---|
| Temperature Accuracy | ±0.3℃ |
| Alarm Output | 2a contact output |
| Applicable Barrels | 5mL, 10mL, 30mL, 50mL |
| Power Supply | AC100 ~ 240V (50/60Hz) |
| Power Consumption | Approx. 80VA |
| External Dimensions | (W)190 x (D)180 x (H)67.5mm (Body) |
| Weight | 1.8kg |
Please instruct us the model of the heater block for use when placing the order.
Standard Accessories
| Power cable set | 1 |
|---|---|
| Connector port for alarm output | 1 |
Temperature Control Block NH-CR series
- For clean room model without cooling fan
- Uses combination of NEO-ONE EX controller
- Peltier method, cooling and heating temperature
- Available heat up to needle when the nozzle tip (Option) for temperature control block is attached
- Cable length is 2,000mm
Specification
| NH-05-CR | NH-10-CR | NH-30-CR | NH-50-CR | |
|---|---|---|---|---|
| Capacity | 5mL | 10mL | 30mL | 50mL |
| External Dimensions | (W)51 x (D)78 x (H)96mm | (W)51 x (D)78 x (H)96mm | (W)51 x (D)87 x (H)116mm | (W)51 x (D)87 x (H)146mm |
| Weight | 0.45kg | 0.50kg | 0.60kg | 0.70kg |
Nozzle tips at the edge for HNG-01 Temperature Control Block is optional.
When you purchase order of Nozzle tips, please instruct us standard needle size you use.
Barrel and adapter assembly are option.
Temperature Control Block NH series
- Uses combination of NEO-ONE EX controller
- Peltier method, cooling and heating temperature
- Slim type, optimal for multi-head
- Available heat up to needle when the nozzle tip (Option) for temperature control block is attached
Specification
| NH-05 | NH-10 | NH-30 | NH-50 | |
|---|---|---|---|---|
| Capacity | 5mL | 10mL | 30mL | 50mL |
| External Dimensions | (W)30 x (D)72 x (H)90mm | (W)30 x (D)72 x (H)90mm | (W)44 x (D)80 x (H)115mm | (W)44 x (D)80 x (H)145mm |
| Weight | 0.40kg | 0.45kg | 0.70kg | 0.80kg |
Nozzle tips at the edge for HNG-01 Temperature Control Block is optional.
When you purchase order of Nozzle tips, please instruct us standard needle size you use.
Barrel and adapter assembly are option.